TAS2110EVM: landing pattern

Hi, Victor,

This is correct, the correct BOM is located in this e2e thread.

https://e2e.ti.com/support/audio/f/6/t/947597

What do you refer with the landing pattern? Do you refer to layout guidelines? The layout guidelines are located in the datasheet:

https://www.ti.com/lit/ds/symlink/tas2110.pdf#page=93

However, we can take a look at their layout in order to see if everything is correct.

Best regards,
Luis Fernando Rodríguez S.

Hello Luis, 

Thank you foremost,

in regards to the landing pattern, 

I am not referring to the layout guidelines,

He is looking for the landing patters as this:

Hi, Victor,

The TAS2110 landing pattern is located in the datasheet.

https://www.ti.com/lit/ds/symlink/tas2110.pdf#page=98

Is this what the customer is looking for?

Best regards,
Luis Fernando Rodríguez S.

Hello,

the customer replied with the following:

"Regarding the land pattern, this is NOT what I am looking for. The land pattern should be the next page. The page you sent is the footprint of the device itself, while the land pattern the recommended shape of PCB pads for the assembly process.

"

Hi, Victor,

Understood.

Let me search for this information and I will come back with it as soon as possible.

Best regards,
Luis Fernando Rodríguez S.