Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 2013 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM1808: PCM1808 -Slave Mode configured

switch
Genius 3110 points
Part Number: PCM1808

Hi ti Team，

Below is the Slave Mode configured to I2S, please help to check whether the design is correct?

  • 0
    TI__Guru 50541 points

    Hi Smith,

    Thank you for your question. Many of our engineers are taking vacation due to the Christmas holiday in the US. Once they return from the holiday, they will address your question. I apologize for any inconvenience this causes.