TAS5624A: Data Sheet Electrical Audio Specification base on AD mode or BD mode?

MOTOTW

Part Number: TAS5624A
Other Parts Discussed in Thread: TAS5624

TAS5624 Data Sheet's Electrical Audio Specification is base on AD mode or BD mode? as it never mention is base on which modulation method.

over 4 years ago

0 Sam(MPAA) Zhang over 4 years ago

TI__Mastermind 19080 points

Hi,

It's in AD modulation. Thanks!

Regards,

Sam

0 MOTOTW over 4 years ago in reply to Sam(MPAA) Zhang

Intellectual 455 points

hi, how about BD's spec? where to refer?

0 Sam(MPAA) Zhang over 4 years ago in reply to MOTOTW

TI__Mastermind 19080 points

Hi,

It's quite an old project... I tried some searching but only found AD results.

Generally speaking BD modulation provide lower idle power consumption and better pop/click suppression, with a small little bit compromise on THD+N performance. Nowadays the BD modulation is more popular.

Thanks!

Regards,

Sam

0 MOTOTW over 4 years ago in reply to Sam(MPAA) Zhang

Intellectual 455 points

HI Sam

Thank you for the info.

So the data below (TAS5624 BTL config) are all in AD mode right?

0 Sam(MPAA) Zhang over 4 years ago in reply to MOTOTW

TI__Mastermind 19080 points

Hi,

Yes, you are correct.

Thanks!

Regards,

Sam

Audio

Audio forum

TAS5624A: Data Sheet Electrical Audio Specification base on AD mode or BD mode?