TAS5754M: About new hybrid flows

Pablo Ocqueteau

Prodigy 20 points

Part Number: TAS5754M

Hello!

I have a question:

I read in the forums that there is a newer version of PurePath2 that adds new process flows (HF8 / 9/10).

Are some of these new HF suitable for a Mono application?

I am currently using HF4 in which I need at least 8 base Biquads, which forces me to use BQ from other blocks :(

Could you give me access to the download of that software? please :)

Greetings and thanks for your support

Pablo

over 4 years ago

0 Robert Clifton56 over 4 years ago

TI__Mastermind 28130 points

Hi Pablo,

While I don't have an answer for you right now, we are taking a look into this!

Best Regards,

Robert Clifton

0 Pablo Ocqueteau over 4 years ago in reply to Robert Clifton56

Prodigy 20 points

Thank Robert for the quick reply!

If you can give me access to download the most "up-to-date" version of PurePath 2 would help me a lot

Gracias!

Pablo

0 Robert Clifton56 over 4 years ago in reply to Pablo Ocqueteau

TI__Mastermind 28130 points

Hi Pablo,

Actually you should be able to send in your request from the PurePath Console page. Once you send in the request it shouldn't take long to gain access.

Best Regards,

Robert Clifton

0 Dylan Yao over 4 years ago in reply to Robert Clifton56

TI__Genius 11090 points

Pablo,

i would assume you have got the access by requesting this in ti.com. So i will close this topic, if more questions, please post a new one.

Dylan

Audio

Audio forum

TAS5754M: About new hybrid flows