• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 274 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM1804： PCM1804 VCOM

MASAHIKO SAMURA
Prodigy 10 points
Part Number: PCM1804

What uF can be connected to VCOM-AGND of PCM1804? I want to attach a value larger than 0.1uF. For example, 10uF or 100uF

  • 0
    TI__Mastermind 23050 points

    Hi Masahiko,

    We recommend a value of 0.1uF only and do not have data for higher values capacitors. I would be careful using excessively large capacitors though as this could potentially make the VCOM voltage unstable. These pins typically only have a few hundred microamps of drive strengths so excessive capacitance can also delay startup time.

    Best,

    Zak