• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 416 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CS4270: What is MCLK and how to set MCLK

Yun
Prodigy 30 points
Other Parts Discussed in Thread: PCM3060

In cs4270 spec, I find there are three bits to do the Ratio Select in Mode Control part.

I have been confused about the ratio select and do not know how to configure these bits.

Is there any problem if I do not set these bits and keep it being the default mode?

  • 0
    TI__Guru 71526 points

    Hello Yun, 

    The CS4270 is a Cirrus Logic device, not a TI device, therefore we cannot provide any assistance.  If you would like to consider using a TI device in the design, perhaps the  PCM3060 would be a good choice. 

    Regards,

    ~Leonard