Can we use the Headset out and ext MIC in same headphone jack, In TLV320AIC3101EVM-PDK - User Guide (Rev. A) show 2 separate jacks for headset out and ext mic in?

This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Can we use the Headset out and ext MIC in same headphone jack, In TLV320AIC3101EVM-PDK - User Guide (Rev. A) show 2 separate jacks for headset out and ext mic in?

Hi Aneesh,
On the EVM, they will need to be separated as this is how the board layout was done. However, in your own design, this is possible and I have seen many customers use headset/mic jacks.
Regards,
Aaron Estrada
Hi Aneesh,
The only reference I have available is from our headset detection application note. It doesn't clearly show how you would connect a jack to our device but shows that this is feasible.
https://www.ti.com/lit/pdf/slaa454
Regards,
Aaron Estrada