Texas Instruments (TI) Audio support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search audio IC content or ask technical support questions on everything from audio amplifiers (op amps) and audio converters (Codecs and ADCs) to audio interface and media processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TLV320AIC CODECS and ADCs: Input clock jitter and noise specifications

    What is the allowable clock jitter and noise for the input clock to the TLV320ADC and TLV320AIC products?

  • [FAQ] TLV320AIC CODECs and ADCs: What I2C speeds/frequencies are supported by the TLV320AICxxxx devices?

    Hello, Many of the TLV320AICxxxx and TLV320ADCxxxx datasheets refer to "standard" and "fast" I2C modes. Can you confirm which speeds these correspond to?

  • [FAQ] TLV320AIC CODECs: CODEC Control Foreign Language Installation Challenges

    Hello, After installing CODEC Control SW and selecting the EVM board this error pop-up is displayed on my screen. What should we do?

  • [FAQ] TLV320AIC, TLV320ADC, and PCM families of Audio ADCs and CODECs and DIR/DIX/DIT/SRC Audio Trancievers and Sample Rate Converters FAQs

    Other Parts Discussed in Thread: PUREPATHSTUDIO , TLV320AIC3204 , TLV320AIC3206 , TLV320AIC3256 , TLV320AIC3253 , TLV320AIC3254 , TLV320AIC3110 , TLV320AIC3100 , TLV320AIC3104 , TLV320AIC3120 Hello, Do you have a list of common questions for TI's families…

  • [FAQ] PCM1861EVM: Using the EVM without GUI or USB-to-I2X interface board

    Part Number: PCM1861EVM Other Parts Discussed in Thread: PCM1861 , , PCM9211 Can I use PCM1861 (HW Controlled device) without using GUI or USB-to-I2X interface board?

  • [FAQ] PCM9211: Using device with no XTAL

    Part Number: PCM9211 Can the PCM9211 be used without the 24.576 input clock? Best regards, Ravi

  • [FAQ] PCM9211: Recommendation for ADC input connection when ADC is not used

    Part Number: PCM9211 What is recommended ADC input connection when ADC is not used? Best regards, Ravi

  • [FAQ] PCM9211: Simultaneous conversion of S/PDIF to I2S AND Analog line-in to I2S audio streams

    Part Number: PCM9211 Can PCM9211 support simultaneous conversion of S/PDIF to I2S and Analog line-in to I2S audio streams? Best regards, Ravi

  • [FAQ] PCM2906: Differences between the PCM290xB and PCM290xC

    Part Number: PCM2906 What is the difference between PCM290xB and PCM290xC? Best regards, Ravi

  • [FAQ] PCM2912A: Handling of UNUSED pins

    Part Number: PCM2912A What is the recommended way to configure the unused pins of PCM2912A when headphone output is not used? Best regards, Ravi

View FAQ threads