[FAQ] PUREPATHCONSOLE: PurePath Console 3 gets stuck while initializing the device

Hi,

In this FAQ you will find a couple solutions to fix the PPC3 stuck symptom during device initialization:

• You can use a previous version of the installer, it can be downloaded from the attachment
  • ppc3_v3.1.3.zip

• You can also check if environment variables are correct on your system by following these sides
  • 3872.PPC3 - EnvVar Fix.pdf

Hope this workaround helps you to proceed with your device evaluation. We're currently working on a new installer release to fix this issue.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators