This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] PUREPATHCONSOLE: PurePath Console 3 gets stuck while initializing the device

Part Number: PUREPATHCONSOLE

Hi,

In this FAQ you will find a couple solutions to fix the PPC3 stuck symptom during device initialization:

  • You can use a previous version of the installer, it can be downloaded from the attachment

  • You can also check if environment variables are correct on your system by following these sides

Hope this workaround helps you to proceed with your device evaluation. We're currently working on a new installer release to fix this issue.

Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators