DAC34SH84EVM: PCB Gerber layer in PDF format

alain PERILHON

Prodigy 160 points

Part Number: DAC34SH84EVM

Hi sir,

Is it possible to send Gerber view of DAC34SH84EVM PCB (SLAR100) in PDF format?

Regards,

Alain

over 3 years ago

0 Kang Hsia over 3 years ago

TI__Guru 71609 points

Hi Alain,

PDF view may give you limited visibility in reviewing the layout. If it helps, we have .brd file that you may be able to use with Allegro free viewer. You can overlay different layers and check for net names in the shape.

Allegro viewer can be downloaded from:

https://www.cadence.com/en_US/home/tools/pcb-design-and-analysis/allegro-downloads-start.html

DAC34H8XEVM_D.brd

0 alain PERILHON over 3 years ago

Prodigy 160 points

Hi Kang,

Thanks for your quick reply.

I prefer in PDF or GERBER format.

(Allegro is 680Moctets to download and a new soft in my computer...)

Regards,

Alain.

0 Kang Hsia over 3 years ago in reply to alain PERILHON

TI__Guru 71609 points

The gerber file is located in the design package file:

https://www.ti.com/lit/zip/slar100

-Kang

+1 alain PERILHON over 3 years ago in reply to Kang Hsia

Prodigy 160 points

Hi Kang,

I have seen them but i can't read .art format with Eagle & GCpreview, there are errors.

So, if you can send in PDF it will be better.

Regards,

Alain

0 Kang Hsia over 3 years ago in reply to alain PERILHON

TI__Guru 71609 points

Hi,

see attached. thanks.

DAC34H8XEVM-LYR_C.pdf

0 alain PERILHON over 3 years ago

Prodigy 160 points

Ok, thanks

Regards,

Alain.

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Data converters

Data converters forum

DAC34SH84EVM: PCB Gerber layer in PDF format