ADS127L01EVM: Triggering problem

Yunus Can Kurban

Part Number: ADS127L01EVM
Other Parts Discussed in Thread: ADS127L01, TM4C1294NCPDT

Hi,

Im trying to digitize a analog signal with ads127l01 evm board. I need to trigger the system to synchronize my existing analog electronics which requires trigger a measurement about 100 times per second and record 1500 samples at 512ksps speed.

is there a way to trigger evm board/delta sigma software externally?

over 4 years ago

0 Zak Kaye over 4 years ago

TI__Mastermind 23050 points

Hi Yunus,

There is a header that provides connections to all of the clock and data lines. You would need to disconnect the PHI board and use your own board to provide the signals to do this as there is no way to trigger the EVM GUI externally.

Best,

Zak

0 Yunus Can Kurban over 4 years ago in reply to Zak Kaye

Prodigy 20 points

Is there a sample code for SPI cominication?

Or can you share EVM source codes for TM4C1294NCPDT ?

0 Zak Kaye over 4 years ago in reply to Yunus Can Kurban

TI__Mastermind 23050 points

Hey Yunus,

Unfortunately we do not have sample code for this part and I don't have source code to share. We are planning to develop code for similar parts, but this is still underway.

Best,

Zak

Data converters

Data converters forum

ADS127L01EVM: Triggering problem