• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 360 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC081C021: Underfill on the ADC

Hideki Hayashi1
Genius 10000 points

Part Number: ADC081C021

Hi experts,

Could you let me know if it is okay that a nearby IC is BGA package and need underfill, then underfill splatter on the ADC081C021?

Best regards,

Hideki

  • 0
    TI__Guru 64765 points

    Hello Hideki-san,

    The situation sounds undesirable versus a situation where the underfill is not splattering on nearby IC's.  Typical underfills are thermally conductive, but electrically non-conductive.  If the underfill is conductive then it could cause leakage or "short" challenges between pins on the ADC081C021.  Otherwise it is difficult to predict long-term impacts of this situation because it is not something we've actively tested for.