ADS1278EVM-PDK: Shorted Pins

Mark Philip Felipe

Part Number: ADS1278EVM-PDK

Hi Team, for your verification.

ADS1278EVM-PDK having a problem with this product its leg connections has a problem because of the connection its soldering are making shortcircuit some legs.

Thank you.

-Mark

over 3 years ago

0 Keith Nicholas over 3 years ago

TI__Mastermind 46560 points

Hi Mark,

When plugging the ADS1278EVM board into the MMB0 board, it is important that the connector pins are properly aligned, J3, J4, and J5. If the pins are bent and shorting together, or there is a solder bridge between pins, then the EVM may not work correctly.

Was the customer able to get the EVM to work before making changes?

Regards,
Keith Nicholas
Precision ADC Applications

0 Mark Philip Felipe over 3 years ago in reply to Keith Nicholas

TI__Genius 10820 points

Hi Keith, I received feedback from them that the board they received was on that status. Can you confirm if this is valid for returns?

Thank you.

0 Keith Nicholas over 3 years ago in reply to Mark Philip Felipe

TI__Mastermind 46560 points

Hi Mark,

Sorry for the delay; I have been out of office for the holidays.

I am not aware of a return policy, but since the EVM is damaged, I suggest you order another EVM for the customer free of charge.

Thanks,

Keith

Data converters

Data converters forum

ADS1278EVM-PDK: Shorted Pins