ADS7044: File needed

Renan Santos Adriano

Part Number: ADS7044

Helo Team,

My customer wanted to access this file in the e2e thread below, unfortunately, it seems that the file is now removed.

Link: https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/742253/ads7044evm-pdk-simple-capture-card-driver-install-fail

Thanks in advance.

Kind Regards,

Renan Adriano
Texas Instruments | Customer Support

over 2 years ago

0 Tom Hendrick over 2 years ago

TI__Guru**** 168485 points

Hi Renan,

Can you tell us the reason why you are looking for that file? That file was associated with an old EVM, the currently available ADS7044 evaluation module uses a different controller.

0 Renan Santos Adriano over 2 years ago in reply to Tom Hendrick

TI__Genius 16500 points

Hello Tom,

My customer requirement is for 12 bit adc which is spi compatible.They have to configure stm32 with this ic. So,they are looking for the driver.

Regards,
Renan

0 Tom Hendrick over 2 years ago in reply to Renan Santos Adriano

TI__Guru**** 168485 points

Hi Renan,

In the original case, the Windows Driver was for the control board, not the ADS7044. We generally don't have code for processors outside TI's portfolio, but I'll look to see if we have something that might get you started.

Data converters

Data converters forum

ADS7044: File needed