• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 48 subscribers
  • Views 432 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSW14J58EVM: I WANT FPGA MCS FILE

EunHyuk Shim
Prodigy 20 points

Part Number: TSW14J58EVM
Other Parts Discussed in Thread: AFE7950EVM,

TSW14J58EVM and AFE7950EVM board will be linked to test. Downloading the self-made MCS file is expected to eliminate the image of the existing TSW14J58EVM. So, I want to receive the MCS file of TSW14J58EVM. What should I do?

  • +1
    TI__Guru* 91947 points

    EunHyuk,

    You can build the MCS file from the TI bitfiles using “write_cfgmem” command in Vivado. 

    If you are using a Rev A TSW14J58EVM, the bit files can be found under the following directory:

    “C:\Program Files\Texas Instruments\High Speed Data Converter Pro\14J58 Details\Firmware”.  

    If you are using a Rev C TSW14J58EVM, the bit files can be found under the following directory:

    “C:\Program Files\Texas Instruments\High Speed Data Converter Pro\14J58revC Details\Firmware”.  

    Regards,

    Jim