• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 290 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1178EVM-PDK: Documentation

Ray Vincent Aranzaso
Mastermind 18180 points
Part Number: ADS1178EVM-PDK


Hi,

Good Day. Customer recently ordered an ADS1178EVM board and it seems as though the board schematic and user manual do not match the physical board. He was wondering if there is a more recent revision (or possibly older) of the documentation that may match the board more precisely. Please advise. Thank you very much.

Best Regards,

Ray Vincent

  • 0
    TI__Mastermind 47320 points

    Hello Ray,

    The User's Guide on ti.com has not changed in some time, and should reflect the most recent hardware.  Can you provide a picture of the board so I can identify the exact version that the customer received?

    Thanks,
    Keith Nicholas
    Precision ADC Applications

  • 0 in reply to Keith Nicholas
    TI__Mastermind 18180 points

    Hi Keith,

    Good Day. Please see attached images of the MMB0 board and the ADS1178EVM for your reference. Thank you very much.

    Best Regards,

    Ray Vincent

  • 0 in reply to Ray Vincent Aranzaso
    TI__Mastermind 47320 points

    Hi Vincent,

    This is a very old version of the board.  Attached is the older version of the User's Guide.  The latest software should still work and can be used with Windows 10 and 7.

    If the kit came with an external AC power supply, then that is the easiest way to use the kit.  If not, then an external lab supply will be needed that meets the following requirements:

    An AC adapter (or lab supply) can be connected to barrel jack J2 on the MMB0. J2 is located next to the USB connector. The adapter must output 6V-7V dc. The connector must be sleeve-negative, tip-positive. It should have a current rating of at least 2A.

    Regards,
    Keith

    ADS1x7x_EVM_User_guide_sbau129c.pdf