• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 46 subscribers
  • Views 190 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC14X250: ADC14X250 recalibration PLL

Zhizhao Niu
Intellectual 2945 points
Part Number: ADC14X250

Hi Team, 

My customer have some products using ADC14X250 and intend to perform PLL recalibration.  We found manual calibration instruction from datasheet as below. Can we follow the instruction by setting register 0x002 to 0x02 then setting register 0x002 to 0x00 to achieve our goal? Is there anything that we need pay attention to?

Thanks. 

B.R.

Zhizhao