ADS1114: PAMB baseboard

Mark Spring

Part Number: ADS1114
Other Parts Discussed in Thread: ADS1115, , ADS1115EVM-PDK

Hello,

I am designing a board with the ADS1114. It does not have a reference board, but the ADS1115 does. It was my intention to buy that board, mostly because it would give me access to the "PAMBoard". The PAMBoard will allow me (as a hardware engineer) to verify my ADS1114 before I give it to software (to connect to a microprocessor). However, the ADS1115EVM-PDK appears to no longer be available. Even though on ti.com it shows 'in stock' at Mouser and Digi-key, it isn't. How can I get a PAMBoard to evaluate my ADS1114 design? Is it available for purchase on its own? A Google search didn't turn up anything.

Thanks in advance!

Regards,
Mark

over 2 years ago

0 Aaron Estrada over 2 years ago

TI__Mastermind 22950 points

Hi Mark,

Unfortunately, the PAMB board cannot be purchased separately. If you search up 'ADS1115EVM-PDK' an obsolete version will show up. You need to search 'ADS1115V2EVM-PDK' (I know... confusing). Searching that on Digikey yielded some stock. I have also provided a link for quick access below:

https://www.digikey.com/en/products/detail/texas-instruments/ADS1115V2EVM-PDK/14004450

Regards,

Aaron Estrada

0 Mark Spring over 2 years ago in reply to Aaron Estrada

Prodigy 120 points

Hi Aaron,

Thanks for the information! I'll just order that board then. Note that on the ADS1114 TI website, it doesn't list the "V2" version of the dev board. If they fixed that, that could save TI some future hassle.

Regards,

Mark

Data converters

Data converters forum

ADS1114: PAMB baseboard