ADS131M06: ADS131M08 Meterology support

Deepak c

Prodigy 100 points

Part Number: ADS131M06
Other Parts Discussed in Thread: ADS131M08

Hello Sir,

I wanted to measure following parameters for meterology project.

1) Voltages (L1-N, L2-N, L3-N, N-PE)-When neutral is present

2) Voltages (L1-PE, L2-PE, L3-PE)- When Neutral is absent.

I am looking for combined solution where i could measure both the Voltages when we applied.

Currently i have made prototype with ADS131M06 for option 2 with 3 channel).

With ADS131M08 ADC i wanted to measure all 7 channel measurement.

Can you please help how we can measure it?

over 3 years ago

0 Cole Macias over 3 years ago

TI__Mastermind 18900 points

Hello Deepak,

Let me get back to you in a couple of days with an answer. I don't have much experience when neutral is absent so I'll have to ask the team.

Thanks,

-Cole

0 Cole Macias over 3 years ago

TI__Mastermind 18900 points

Hello Deepak,

And so I don't make any incorrect assumptions, what does PE stand for?

Best,

-Cole

0 Deepak c over 3 years ago in reply to Cole Macias

Prodigy 100 points

PE Stands for Protective Earth.

0 Deepak c over 3 years ago in reply to Cole Macias

Prodigy 100 points

PE Stands for Protective Earth.

0 Cole Macias over 3 years ago

TI__Mastermind 18900 points

Hello Deepak,

Small update, a few members were out of office the past couple of weeks so we're able to work with them now.

When you're talking about system, do you need the same HW and SW/FW in both cases? Or would it be possible to populate and depopulate different components on the board with the same layout, depending on the system.

Thanks,

-Cole

Data converters

Data converters forum

ADS131M06: ADS131M08 Meterology support