• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 378 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSW1400EVM: DAC34H84EVM Quartus project

Jin Park
Prodigy 10 points

Part Number: TSW1400EVM

Hello I am trying to custumize quartus project (which TI provied) so I can get it to do one shot mode and PRF mode.

Before these I am having hard time even to see the DAC outputs. Can i get some advice?? Which part should I change to get it warking?

I am trying this with TSW1400EVM and DAC34H84 EVM. Thank you.

  • 0
    TI__Mastermind 23760 points

    Hi Jin,

    I'm not sure about the quartus project you are referring to. Are you having trouble while operating the DAC34H84 using HSDC Pro?

    Thanks, Chase

  • 0 in reply to Chase W
    Prodigy 10 points

    Hi Chase thank you for the reply!

     The project I am referring to is "TSW1400EVM ADC and DAC Firmware Quartus project". (SLWC115.ZIP).

     I am able to compile this project and put it tin to Altera FPGA (rbf file) by HSDC. But after pressing send button. I could not see the DAC result. I am not sure what is the problem. right now I am tring to change define.vh hoping to work.

    Thank you once agian, Jin

  • 0 in reply to Jin Park
    TI__Mastermind 23760 points

    Hi Jin,

    Thanks for mentioning the file number. Unfortunately, we are unable to provide support on modifying this firmware. Is there any particular reason that HSDC Pro will not work for uploading the TSW1400EVM firmware and sending the custom pattern? 

    Regards, Chase