Hi there,
the figure and table on page 3 of the datasheet shows that:
pin 11 = SDO-A
pin 12 = SDO-B
whereas Figure 52 on page 28 (layout example) shows
Pin 11 = SDO-B
pin 12 = SDO-A
Which is correct? Thanks in advance!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi there,
the figure and table on page 3 of the datasheet shows that:
pin 11 = SDO-A
pin 12 = SDO-B
whereas Figure 52 on page 28 (layout example) shows
Pin 11 = SDO-B
pin 12 = SDO-A
Which is correct? Thanks in advance!
Hi Skippy,
Apologies for the confusion here and thank you for pointing this out to us. The pinout on the package view and terminal descriptions is correct. SDO-A is pin 11 and SDO-B is pin 12.
Regards,
Aaron Estrada