ADS8584S: ADS8584s

Monica

Part Number: ADS8584S

Hi,

I'm using a 10khz sampling frequency and a 10Khz input frequency at +/- 10V.

I didn't get proper output on the first data pin.

hereby I have attached a simulation screenshot.

I appreciate any help you can provide.

0 Dale Li over 3 years ago

Hi Shalini,

You violated the sampling theorem, you can reduce input signal frequency. For instance, use 1kHz input signal frequency.

Regards,

Dale

0 Dale Li over 3 years ago in reply to Dale Li

Hi Shalini,

Your screenshot was missed, please provide it. What's the simulation? Did you test the ADC on your circuit board or an EVM?

Best regards,

Dale

0 Monica over 3 years ago

0 Monica over 3 years ago in reply to Monica

0 Monica over 3 years ago in reply to Monica

Sorry!!!!

My sampling frequency is 100 kHz, and my input signal frequency is 10 kHz.

0 Dale Li over 3 years ago in reply to Monica

Hi Shalini,

I can see your FRSTDATA signal is shown in your timing. I saw you already closed this thread, do you still have a question or concern?

Best regards,

Dale

Data converters forum