ADS1198: Power on sequence of ads1198

white white

Part Number: ADS1198

Hello, E2E engineer, how to determine the power on sequence of ads1198? My MCU and ads1198 are powered on at the same time, and then the reset command is sent with a delay of 100ms. Is this consistent with the power on sequence

thank you

over 3 years ago

0 ChienChun Yang over 3 years ago

TI__Mastermind 19815 points

Hi,

This is App Engineer from TI.

I will communicate with you through the email you sent to me regarding to the e2e tickets threads -

https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1126582/ads1198-communication-problems-of-ads1198-devices

and

https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1126585/ads1198-power-on-sequence-of-ads1198

Thanks

0 ChienChun Yang over 2 years ago in reply to ChienChun Yang

TI__Mastermind 19815 points

Hi,
Since I did not hear back from you, I believe my suggestions answered your questions.
I will close this post and if you have any pending questions, feel free to post them here or open a new thread.
Thanks and have a great day!

Data converters

Data converters forum

ADS1198: Power on sequence of ads1198