• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 384 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8343: Reference code

Allen Lu
Intellectual 2750 points

Part Number: ADS8343

hi team:

 regarding the ADS8343 device, do we have a reference code for primary inspection?

 as the below SCH, if we do not connect the busy PIN to MCU , is that okay to follow up the timing with SPI without indication from busy signal?

  • 0
    TI__Mastermind 25040 points

    Hello, 

    it is possible to operate the device without monitoring BUSY output, though it is good practice to do so. Monitoring BUSY will provide information of the status of the device, and can be used to trigger an action or next conversion. 

    But, it is not necessary to monitor, and the device can still be used correctly. 

    Regards

    Cynthia