• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 227 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE5832LP: I would like to apply for an AFE5832LP code

Ruitao Han
Prodigy 10 points
Part Number: AFE5832LP

Hi  Team,

I purchased the AFE5832LP in December last year,and plan to use FPGA to drive the chip.

But I had a lot of problems with programming.So i want to apply a code of the Verilog.

The FPGA model I use is XC7K325T.

Is this possible?

Regards,

Hanruitao

  • 0
    TI__Expert 7010 points

    Hi Hanruitao,

    Do you have AFE5832LP EVM or a custom board?

    The device programming can be done using SPI interface and data capture would require LVDS interface.

    Since you mentioned that you purchased the device in December last year, so could you please elaborate specifically which area are you facing difficulty with? 

    It would help me further to assist you if you can provide your problem with a little bit of detail.

    Regards,

    Abhishek