• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 237 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Counter for Digital input events

Mikhail Soloviev
Prodigy 10 points

Other Parts Discussed in Thread: ADS7138

The part ADS7138 has registers that keep the count of the input events (EVENT_COUNT_CHx). Do these counters contain the analog events only (passing thresholds)? Can they be configured to count the digital input transitions?  

  • +1
    TI__Mastermind 25070 points

    Hello

    The EVENT_COUNT_CHx only counts events when the channel is configured as an analog input, thus does not apply when the channel is configured as a digital input. If the value of the input is not of a concern and simply the transitions, then the ADC input can be configured as analog input, even though the input will be a digital signal and have thresholds set accordingly to count the transitions.

    Also, would the zero cross detection mode be of interest? this is a feature available in the ADS7128

    Regards

    Cynthia