• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 368 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC53204: DAC53204 - SPI MODE

Ariel Greenbaum
Prodigy 95 points
Part Number: DAC53204

Hello, 

what SPI modes are supported by DAC53204? 

  • 0
    TI__Mastermind 34168 points

    Hi Ariel,

    The SCLK can idle high or low, but data is shifted out on the rising edge and captured on the falling edge. We typically don't specify the SPI mode because the definitions sometimes vary based on the controller used. 

    Based on the figure you shared, it looks like modes 1 or 2 will work. 

    Best,

    Katlynne Jones