• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 231 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADS8686SEVM-PDK: schematic and layout in Altium software

ADS131E08EVM-PDK: symbol and project

ziad jabbour
Prodigy 60 points
Part Number: ADS131E08EVM-PDK
Other Parts Discussed in Thread: ADS131E08,

hello 

I am integrating the ADS ADS131E08 into my design

can i have the altium project of ADS131E08EVM-PDK to get the symbol and footprint please

best regards

Ziad JABBOUR

  • 0
    TI__Guru 66296 points

    Hello Ziad,

    Welcome to our forum and thank you for your post.

    Unfortunately, this project was not completed in Altium, so we do not have the schematic symbol or PCB footprint to provide. However, all of the pertinent information to create your own footprint can be found at the end of the ADS131E08 data sheet in the Mechanical Data and Land Pattern information pages.

    Regards,

    Ryan