ADS5560: can we use sampling frequency 46Mhz with this ADC

vetrivel M

Part Number: ADS5560
Other Parts Discussed in Thread: ADS5562

in our designed board, we are mounted ads5560 instead of ads5562. as per the datasheet of ads5560 the maximum sampling frequency is 40Mhz.but we need to sample the data at 46Mhz.

so if we use ads5560 with the sampling rate 46Mhz, will the adc work? if yes what will be the impact in performance (SNR,SFDR, ENOB)?

over 2 years ago

+1 Rob Reeder over 2 years ago

TI__Mastermind 38690 points

Hi Vetrivel,

It would be best to use a ADS5562 device, not an ADS5560 if you plan to sample at 46MSPS. This is not the rated sampling rate for the ADS5560.

The device, will work, but the impact on the SNR, SFDR and ENOB could be all over the place, it could be slight to drastic, in terms of degradation as the device was not characterized this way, above it's rated sampling rate.

Regards,

Rob

0 vetrivel M over 2 years ago in reply to Rob Reeder

Prodigy 150 points

Hi Rob,

Thanks for your response.

Data converters

Data converters forum

ADS5560: can we use sampling frequency 46Mhz with this ADC