DDC118: DDC A-B offset calibration using Testmode

Birger Neumann

Part Number: DDC118

Hello,

I have a question regarding the Correction of DDC A/B Mismatch and Noise Optimization / [FAQ] How to calibrate offset and gain in the DDC devices?

Can we use the "testmode"-signal for calibration and offset-correction between the A and B Channel of the integrator?

Or does that not lead to the required results?

over 3 years ago

0 ChienChun Yang over 3 years ago

TI__Mastermind 19815 points

Hi,

Please allow us 24 hours to get back to your question.

Thanks

0 ChienChun Yang over 3 years ago in reply to ChienChun Yang

TI__Mastermind 19815 points

Hi,

Sorry for the delay. We need more time to look into this.

Please allow another 24 hour to reply to you.

Thanks.

0 ChienChun Yang over 3 years ago in reply to ChienChun Yang

TI__Mastermind 19815 points

Hi,

Apology for the delay. I am reaching out to you via the email.

Thanks.

Data converters

Data converters forum

DDC118: DDC A-B offset calibration using Testmode