• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 342 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC3664: PDN/SYNC Usage

SVJS
Prodigy 140 points

Part Number: ADC3664

Hi, 

In my project, I am using 3 ADC3664. I have a doubt regarding the usage of PDN/SYNC pin. 
Here I am implement a design as per the data got from Datasheet. Can you please check it with for synchronization of all 3 ADCs. 
 
Thanks


  • 0
    TI__Genius 15321 points

    Hi SVJS,

    Do you plan to use the NCO / decimation block? If you run in bypass mode, you do not need the sync signal. The sync signal is needed to synchronize the NCO phase across devices and the internal clock divider of the decimation filter. Do you have additional concerns with implementation?

    Regards, Amy