ADC32RF55: Register programming sequence

Jonathan Kolbrak

Part Number: ADC32RF55

Hello,

Is there a way to do a complete register dump from the eval board software for a given configuration. That will go through the 10 steps in the datasheet to get it programmed? Similar to the "Export Register Map" in the TICS Pro software?

Thanks,

Jon

over 3 years ago

0 Amy over 3 years ago

TI__Genius 15321 points

Hi Jon,

I am checking on this and will get to you soon.

Regards, Amy

+1 Chase W over 3 years ago

TI__Mastermind 24180 points

Hi Jon,

The software which you are evaluating with will have different register programming when compared to the final silicon due to trim and calibration registers changing across the silicon development. We are working to release an updated GUI which has the final register sequence in order with accordance to the datasheet. The datasheet registers and sequence are correct for final silicon devices which you may or may not be evaluating with. To determine if a device is non-final/evaluation silicon, the marking on the package will show a P, X, or Z prefix before "ADC". Please expect to hear from Fadi in the upcoming few days about this. In the meantime, please use the software here which has updated trim register sequence.

https://tidrive.ext.ti.com/u/lRPtm62T7a2HE-2c/5d32b106-43c9-4efe-b5e5-e60c9e4500ad?l

Regards, Chase

0 Jonathan Kolbrak over 3 years ago in reply to Chase W

Intellectual 500 points

Thank you.

Data converters

Data converters forum

ADC32RF55: Register programming sequence