AFE5832LPEVM: Fx3 Interface Dll

Hi Balaji,

Thanks for reaching out.

Do you have access to the MSS server for the SWAROOP design?

If not please share me your TI login Id, I can enable your access to the server where you can find both the source codes for the FPGA (this will cover the FPGA-FX3 interface) and the FX3 source code which will have the information about PC to FX3 to FPGA communication.

There are some documents also uploaded. You can have a look and let me know if something is unclear.

Thanks & regards,

Abhishek

Hi Abhishek,

PFA, TI Login ID: balaji.padmanaban@tessolve.com

Can you please share me the details how to access MSS server for the SWAROOP design .

Thanks & regards,

Balaji 

Hi Abhishek,

Thanks for your support. We raised the queries via mail. Please check and revert back.

Thanks & Regards,

Balaji

Hi Balaji,

Yes, I will look at it and get back to you by tomorrow.

Thanks & regards,

Abhishek

Hi Abhishek,

We are looking forward to your response.

Thanks,

Balaji 

Hi Abhishek,

Can you please support us for the above queries.

Thanks,

Balaji 

Hi Balaji,

Sorry for the delayed response on this due to active development going on at our end.

I tried to check if someone from our team had worked on the development of the software for the FX3 and FPGA. 

Turns out they have moved out of TI and the framework was developed by third party.

Hence, I am not able to get the required help on FX3 and FPGA side of the design. Please use to available resources already shared with you to figure out the communication. Since we are not expert on FX3 device, it is really difficult to support the same.

If you have any query related to the AFE, we will be more than happy to to help you. Regarding the FX3 communication, i think its best to connect with Cypress support and get the reuqired information.

Thanks & regards,

Abhishek

Hi Abhishek,

Thanks for your response.

Can you please support us to get the source code of AFE5832LPTX TI GUI and HSDC pro TI GUI that has made by LabVIEW.

Regards,

Balaji

Hi Balaji,

I am sorry but the device GUI & HSDC GUI is developed by third party and they have not shared the source code with us.

Hence, we do not have the source code you require.

My apologies.

Thanks & regards,

Abhishek

Hi Abhishek,

Thanks for your support.

Regards,

Balaji

Hi Balaji,

Thanks. 
Do let us know if you have any questions related to the AFE.

I will go ahead and close this thread.

Thanks & regards,

Abhishek