• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 45 subscribers
  • Views 149 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8688A: Get out of Frame Abort

Joselito Go
Expert 4590 points
Part Number: ADS8688A

Hi Experts,

Good day.

What specific command should be sent to get out of the INVALID state to normal operation or the FRAME_ABORT condition?

Please advise.

Regards,

Josel

  • 0
    TI__Mastermind 39805 points

    Hi Josel,

    There is no specific command to to get out of the INVALID state. The falling edge of the /CS signal initiates a new data conversion, so any valid command (e.g. "Manual CH x Selection" or "NO_OP" command)  will start a new conversion and go back to normal operation.

    Regards,

    Dale