TSC2007: TSC2007 Address Pin

Paulo Cabral

Prodigy 10 points

Part Number: TSC2007

Hello all, In a similar case, does it possible work with this device without any connection on A0 and A1?

if i leave open this pins, maybe does it possible disable this address by any command by I2C?

over 3 years ago

0 Arash Loloee over 3 years ago

TI__Mastermind 36961 points

Hello Paula,

I need to find and forward this post to the team that supports this device.

Regards,

Arash

0 Jeff McPherson over 3 years ago in reply to Arash Loloee

TI__Guru 51460 points

Hi Paulo,

If A0 and A1 are left floating the I2C communication will become unreliable. The I2C address is set by the logic state of A0 and A1, so they should only be either grounded or connected to VDD.

Thank you,
Jeff McPherson

Data converters

Data converters forum

TSC2007: TSC2007 Address Pin