ADS54J69EVM: Compatibility with FPGA capture board

Joongho Ahn

Part Number: ADS54J69EVM
Other Parts Discussed in Thread: TSW14J50EVM, TSW14J57EVM, ADS54J69

I would like to test an ADC evaluation board, ADS56J69EVM, but compatible FPGA capture board, TSW14J56EVM has been discontinued.

Could I test the ADS56J69EVM with TSW14J50EVM or TSW14J57EVM?

Please let me know which TSW board is compatible with ADS56J69EVM.

Thank you!

over 1 year ago

+1 Chase W over 1 year ago

TI__Mastermind 19655 points

Hi Joongho,

Please use the TSW14J57EVM as the FPGA capture board for this EVM. If the device INI file is not already made for this device (which it probably is), it will be much easier for us to make than if you were using TSW14J50EVM.

Thanks, Chase

+1 Joongho Ahn over 1 year ago in reply to Chase W

Prodigy 20 points

Thank you, Chase!

To verify INI files, I installed HSDC Pro (v5.20), and found two INI files, [ADS54J69_2x_4222.ini] and [ADS54J69_2x_4421.ini] in folder [C:\Program Files (x86)\Texas Instruments\High Speed Data Converter Pro\14J57revE Details\ADC files].

Could I use it?

Thanks, Joongho

+1 Chase W over 1 year ago in reply to Joongho Ahn

TI__Mastermind 19655 points

Hi Joongho,

Yes, the TSW14J57 should be a ready to go solution. Thanks for verifying prior to ordering.

Thanks, Chase

Data converters

Data converters forum

ADS54J69EVM: Compatibility with FPGA capture board