ADS131M02: NC pin

Shota Mago

Expert 8950 points

Part Number: ADS131M02

Hi team,

Is NC pin open internally?

(There is no concern even if the pin is shorted to adjacent one?)

Best regards,

Shota Mago

over 3 years ago

+1 Joachim Wuerker over 3 years ago

TI__Mastermind 25115 points

Hi Mago-san,

the NC pins are internally bonded actually. You should leave the NC pins unconnected or connect them to GND.
Are you asking because of a pin failure mode analysis? If so, we have a Pin FMA available in the functional safety document for ADS131M02-Q1.

Regards,
Joachim Wuerker

0 Shota Mago over 3 years ago in reply to Joachim Wuerker

TI__Expert 8950 points

Hi Joachim-san,

Thanks for quick answer!

I'm not sure background of this question, but it seems to be related to failure mode analysis. I will introduce Pin FMA data of Q1.

Best regards,

Shota Mago

Data converters

Data converters forum

ADS131M02: NC pin