Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 138 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC12DL3200EVM: DAC12DL3200EVM: DAC12DL3200: I need to find NRZ cfg file

Hyunsuk Lee
Prodigy 50 points
Part Number: DAC12DL3200EVM
Other Parts Discussed in Thread: DAC12DL3200

Dear

  1. I want to need  new NRZ configuration
    1. I know that TI already supported NRZ Single DAC configuration
    2. I can find LMK_100M_LMX_6400M_Mode2_NRZ_Single_DAC at below directory
      1. C:\Program Files\Texas Instruments\DAC12DL3200PG2\Configuration Files
    3. But I want more configuration another frequency case (for examle)
      1. LMK_100M_LMX_3200M_Mode2_NRZ_Single_DAC
      2. LMK_100M_LMX_1600M_Mode2_NRZ_Single_DAC
      3. LMK_100M_LMX_800M_Mode2_NRZ_Single_DAC
    4. Could you provide these to me?
  2. Question at Confiuration about EXT_CLK_Mode2_NRZ_Single_DAC.cfg
    1. I read DAC12DL3200_Evaluation_Module.pdf
      1. Is it possible at only 6.4Ghz and 1.6Ghz?
      2. is it possible another frequency ?
        1. for example 3.2Ghz or 1.6Ghz or 800Mhz??

Best regards

Michael

  • 0
    TI__Mastermind 21750 points

    Hi Michael,

    We don't have these other configs at this time and I am out of office this entire week so it will be next week before any config can be created and provided to you. In the meantime, you can use the GUI to configure the device for single DAC mode with JMODE 2 at these rates and then in the DAC A tab of the GUI, select the NRZ option in the DACA_output_mode drop down.

    Regards, Chase