DAC7724: Need to verify the marking position differences - DAC7724N

manoj balakrishnan

Part Number: DAC7724

Hi Experts ,

Good Day ,

Please refer to below images and where printing of markings happened in slight changes in position. Can you please just check it changes are normal and all three part images are belongs to same date code and same package ?

Looking forward for your advise on this matter.

Thank you

Regards

Manoj Balakrishnan

over 2 years ago

0 Katlynne Jones over 2 years ago

TI__Mastermind 42273 points

Hi Manoj,

Were these parts purchased through an authorized distributor?

Best,

Katlynne Jones

0 manoj balakrishnan over 2 years ago in reply to Katlynne Jones

Intellectual 405 points

Hi Katlynne ,

Parts are received from Authorized source . We noticed only marking position difference and remaining all dimensions , X-Ray wire bonding are consistent no changes found between parts.

Refer to below Label for better reference.

Looking forward for your advise on this to accept the parts.

Thank you

Regards

Manoj Balakrishnan

0 Katlynne Jones over 2 years ago in reply to manoj balakrishnan

TI__Mastermind 42273 points

Hi Manoj,

I have no concern with the slight difference in the marking placement as long as you have purchased the devices from an authorized distributor. If you hadn't, we wouldn't be able to guarantee.

You are ok to accept these parts.

Best,

Katlynne Jones

Data converters

Data converters forum

DAC7724: Need to verify the marking position differences - DAC7724N