• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 46 subscribers
  • Views 207 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8860EVM-PDK: ADS8860V2EVM-PDK SDK

Omer YILDIRIM
Prodigy 40 points
Part Number: ADS8860EVM-PDK
Other Parts Discussed in Thread: ADS8860

Hi eveyone,

I  will use ADS8860V2EVM-PDK. But I want to use ADS8860V2EVM-PDK with my software. Is this possible? Is there any SDK for ADS8860V2EVM-PDK? Can I use it with my software? Or can it only be used with the software offered?,

Best Regards.

  • +1
    TI__Mastermind 39910 points

    Hello Omer,

    The PHI (data capture card) does not support any custom software, and there is no SDK available.  However, if you have an external MCU development board, you can jumper wires between these two boards to communicate with the ADS8860EVM.  The ADS8860 uses a standard 4-wire SPI interface, and there are test points that you can connect to these signals.  You will also need to provide a +5.5V analog supply and a DVDD supply set to the same voltage level used by the MCU development board.

    Regards,
    Keith Nicholas
    Precision ADC Applications

  • 0 in reply to Keith Nicholas
    Prodigy 40 points

    Hello Keith,

    Thank you for your answer. I try to use it with external MCU.

    Best Regards.