• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 48 subscribers
  • Views 395 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DAC80508EVM: DAC80508EVM do not work.

DAC80508EVM: DAC80508 Software do not work.

s.tanoi
Prodigy 30 points

Part Number: DAC80508EVM
Other Parts Discussed in Thread: USB2ANY, DAC80508

The 80508EVM is connected to USB2ANY. 

USB2ANY Explore works ( I done update with USB2ANY hardware ) . 

Next, I run the DAC80508 Software. It is in demo mode. I try initialize, but it fails. 

Please, give me advice. 

  • 0
    TI__Mastermind 42253 points

    Hi Tanoi-san, 

    Does the DAC80508EVM GUI prompt you to update the firmware when opened? The Explore tool and DAC GUIs use a different firmware and typically the GUI will also prompt an update. Also make sure the Explore tool is not running when you open the GUI. They are not meant to be used at the same time. 

    Can you uninstall the GUI and make sure to reinstall with the USB2ANY not connected to the computer and install by right clicking and running the exe as administrator:

    Best,

    Katlynne Jones