DAC3283EVM: DAC3283EVM GUI Testing

haripriya k

Part Number: DAC3283EVM
Other Parts Discussed in Thread: DAC3283

Hi,

I am using DAC3283EVM board with ZCU 106 evaluation board with FMC connector. Though I have referred to the EVM user guide, but I am not able to configure the GUI. Can you please help me with basic testing of the GUI. How I can generate some default values using the GUI. Provide the steps to follow while doing the basic testing of the Evaluation Board through GUI. If any PPT or video tutorial is available, it would be helpful.

9 months ago

0 Kang Hsia 9 months ago

TI__Guru 71019 points

Hi there,

The basic configuration is already part of the DAC3283 EVM default. You can double check if this is the right sample rate/interpolation/mixer structure for your application. See diagram below.

For description on correlating your application usage to DAC3283 configuration, please refer to datasheet section 9 for detail examples:

www.ti.com/.../dac3283.pdf

0 haripriya k 9 months ago in reply to Kang Hsia

Prodigy 25 points

Dear kang,

Thank you for your reply. When I am resetting USB port and after that I am clicking on "Initialize" button, the LED corresponding to CDC62005 is not blinking immediately. And the LED corresponding to TRF3720, is not blinking at all. Please tell how to solve the issue. Also, I want to know about the "exit" button. What it will signify, because, when I am pressing that button, then I am getting some options to "RUN" or "RUN Continuously".

0 Kang Hsia 9 months ago in reply to haripriya k

TI__Guru 71019 points

Hi Haripirya,

Could you please take a look at the following two threads? I have made a few suggestions that may help with your debug. If needed, we would be happy to replace your EVM as well.

https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1288070/dac3283evm-evaluation-board-is-having-problem-in-locking-clock-and-synthesizer

e2e.ti.com/.../dac3283evm-issue-in-generating-output

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Data converters

Data converters forum

DAC3283EVM: DAC3283EVM GUI Testing