ADC09QJ1300-Q1: ADC09QJ1300-Q1 AMI simulation model

jeno.zhang

Part Number: ADC09QJ1300-Q1
Other Parts Discussed in Thread: ADC12QJ1600, , ADC09QJ1300

hi，

The AMI simulation model for ADC09QJ1300-Q1 on TI's official website is ADC12QJ1600. Can ADC09QJ1300-Q1 also be used? If not possible, could you please help provide the AMI simulation model for ADC09QJ1300-Q1？

Thanks！

7 months ago

0 Eric Kleckner 7 months ago

TI__Expert 4630 points

Hello Jeno,

The ADC12QJ1600 models are used for the ADC09QJ1300 as well.

Best,

Eric

0 jeno.zhang 7 months ago in reply to Eric Kleckner

Expert 2385 points

hi，

The customer requires AMI files to simulate eye diagrams, but IBIS files cannot simulate eye diagrams and cannot provide information on the driving current of the signal source；

Thanks！

0 Rob Reeder 7 months ago in reply to jeno.zhang

TI__Mastermind 26410 points

Hi Jeno,

Correct, if you download the files, you will see inside the download, are AMI files, which can be used to simulate the eye diagrams.

Regards,

Rob

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Data converters

Data converters forum

ADC09QJ1300-Q1: ADC09QJ1300-Q1 AMI simulation model