• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 231 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC12J1600: Time out error on GUI while trying to pass a sine wave to ADC.

Sahiti Vinjamuri
Prodigy 20 points
Part Number: ADC12J1600

Hello! I am getting the below error. I am giving a sine wave input of 10MHz to the ADC. Please let me know on what needs to be changed. ADC12J1600 is connected to TSW14J10 which is in turn connected to KC705 (FPGA board). 

Please find a past thread on this issue . 

support.ti.com/csm