• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 149 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DAC5573: Can I switch the 4 internal DACs independently to High-Z output?

DAC63004W: FB pin Hi-Z in VOUT mode

Austin Allen
Intellectual 2435 points
Part Number: DAC63004W

Tool/software:

Hello team,

I am in voltage output mode and have FB1 connected to OUT1 for closed-loop amplifier. If I write a 1 to VOUT-PDN-1[1]  and a 1 to VOUT-PDN-1[0], thus powering down VOUT-1 to Hi-Z, can I assume that FB1 will become Hi-Z as well? I am concerned that there is active leakage on FB1 in this scenario.

If not, is there a way I can ensure that FB1 is Hi-Z?

Thanks!

Austin Allen

  • 0
    TI__Mastermind 34548 points

    Hi Austin, 

    The FB pin is also set to Hi-Z, but there will always be leakage through internal device components. 

    The leakage was characterized to be on the nA scale when FB and OUT are connected together and the output channel is configured in Hi-Z.

    Best,

    Katlynne Jones