TSW1418EVM: Data capture EVM for the ADS4129EVM?

Also, it should be mentioned that I currently have the FMC-ADC adapter mezzanine board.  The FMC pins on the TSW1418 do not seem to correspond to the FMC pins on the FMC-ADC adapter card at all.  So how would I adapt the ADS4129EVM to ANY data capture cards?  Are ANY available that I can use with the ADS4129EVM? 

Hi Chris,

Do you have the TSW1418?

It would be better to use the TSWDC155EVM instead for this interface.

Regards,

Rob

Hello Rob, we do not have the TSW1418.  The documents for the TSWDC155EVM don't mention if it can work with the HighSpeedDataconverter Pro software or not.  

Any thoughts on whether the TSWDC155EVM can work with the HSDC Pro gui?  We need the FFT output function of the software, which is why we need a data capture board to begin with.

Hi Chris,

Sorry for the delay. I am checking into this for you and will respond in the next few days.

Thanks,

Rob

Hi Chris,

I apologize for the delay here, are you still interested in getting setup with the TSWDC155EVM?

Regards,

Rob

Hello Rob,

I'm interested in any data capture EVM that will allow me to see real time FFT from the ADS4129EVM and is available for purchase.