• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 237 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DDC112: DDC112U Suitability to Small Signal Measurement

DDC112: Regards Application

Gowtham R
Prodigy 140 points
Part Number: DDC112

Tool/software:

Hi Sir,

Shall we use DDC112 IC for Electrometer application.

  • 0
    TI__Expert 4680 points

    Sorry, can't tell just like that. The device measures very low input currents flowing into virtual ground. If you can configure your measurement to take advantage of that, then it should be ok... Please see DS for more details.

    Best regards,
    Eduardo