• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 51 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC37J84: PSPICE-TI and ADS Keysight Analisys and Simulation Circuit

Erivelton Castro
Prodigy 150 points
Part Number: DAC37J84

Tool/software:

Dear,

I would like to simulator this DAC37J84 using PSPICE-TI and ADS Keysight.

Are there library to apply this simulation? How can i do it?

Regards.

Erivelton Castro

  • 0
    TI__Guru 69954 points

    Hello,

    You should be able to find the info in the tools below in the DAC37J84 webpage:

    www.ti.com/.../DAC37J84

  • 0 in reply to Kang Hsia
    Prodigy 150 points

    Hello,

    The IBIS model is used to simulate the differential line of JESD204 communication.

    I would like to simulate the quantizer block to define and calculate the SNR, noise, effective noise figure, quantization error, minimum and maximum signal.

    I have installed PSpice for TI and does not have this device in library. I opened the reference circuit on PSpice for TI.

    I already have simulation the RF circuit transmitter and receiver using the ADS keysight software.

    Could you help me how can i simulator it?

    Regards,

    Erivelton Castro