This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC128S022: Chip Select Signal

Part Number: ADC128S022

Tool/software:

Hello,

I am going to introduced ADC128S022 in my new design. 

I wanted to know whether I can tie CS pin permanently low to ground or not?

I have only one ADC in my CKT and SPI lines are dedicated specially to only this ADC device.

Nothing else is connected to SCLK, SDI and SDO pins of my controller.

Thanks,